When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fast Shipping
Competitive Pricing
National Instruments NI 9236 C Series Strain/Bridge Input Module - USA Seller
TheNational Instruments NI-9236is an 8 differential analog input Channel,Strain/Bridge Input Module. The channels have an ADC resolution of 24 bits, a minimum sampling rate of 794 S/s, with an overvoltage protection of ±30 V between any two terminals. This model can acquire channels at up to 10 kS/s per channel, simultaneously on all its channels. There are two versions of theNI 9236module. Part number779994-01is not conformal coated, while part number779994-02is conformal coated. Part number785996-01has bridge/strain input.TheNational Instruments NI-9236has a broad input range, i.e., ±29.4 mV/V. This module is a practical solution for strain gauge measurements up to 350 Ω. For increased safety and reduce high-common-mode noise rejection, theNI 9236offers 60 VDC isolation.
The allowable operating temperature range for this module is -40 °C to 70 °C and it can withstand up to 50 g shock and 5 g vibration. However, to protect connections to theNI-9236, it is recommended to use the NI-9965 backshell kit for applications where high vibrations are inevitable. This input module is designed for measurement systems based on National Instruments CompactRIO, CompactDAQ or other C series hardware. TheNI-9236offers 3.3 V ± 1% constant voltage excitation and 46 mA (max) output current. The excitation supplies continuous regulation when a single channel experiences a gage short and goes into a current limit state when a gage short is sensed on more than one channel. The device has a power consumption of up to 675 mW when in active mode, while it consumes 25 μW maximum when in sleep mode.
While operating in active mode, thisStrain/Bridge Input Modulerequires 675 mW of power (max) and consumes 25 μW of power (max) in sleep mode. By type, the front connector provided with this module is spring terminal. TheNI-9236is designed to handle 18 AWG to 28 copper (Cu) conductor wire with 7 mm of stripped insulation. The device weighs 5.4 oz. It has a recommended storage temperature range of –40 to 85 °C, and a noncondensing operating humidity range of 10% RH to 90% RH.
We reserve the right to deny any payment that we consider fraudulent or suspicious. Payment must be received within 2 days of purchase. Otherwise, if no contact has been established the listing will be void.
All Packages will be shipped within 24 hours after the payment is cleared via USPS with Tracking
We take utmost care towards packaging of the products. All products are packed in sturdy boxes with proper packing/cushioning to ensure there is no damage to the product during transit.
We accept returns only if the item was not as described in our listing or found defective on arrival. Buyer must return the item exactly as received within 30 days of delivery date.
Return shipping and handling is the sole responsibility of the buyer.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
We hope you will love your purchase, however if you need to return it, we have a 60 day return policy.
FEATURED PRODUCTS
YOU MIGHT BE INTERESTED IN
National Instruments NI 9216 C Series Temperature Input Module - USA Seller
$995.00NEW National Instruments NI 9871 Interface Module RS485/RS422 - USA
$1,000.00National Instruments NI 9866 C Series LIN Interface Module - USA Seller
$1,000.00National Instruments NI 9862 C Series CAN Interface Module - USA Seller
$850.00National Instruments NI 9208 C Series Current Input Module, Dsub - USA Seller
$875.00National Instruments NI 9265 Analog Current Output Module - USA
$450.00National Instruments NI 9209 C Series Voltage Input Module - USA Seller
$1,050.00National Instruments NI 9860 CAN Interface Module, TRC 8542 w/ Power Cable
$1,500.00National Instruments NI 9375 16-Ch 24V Digital Input & Output Module - USA
$211.65National Instruments NI USB-8506/2 XNET LIN Interface Device, 2-Port
$849.15National Instruments NI 9516 C Series Motor Drive Interface Module - USA Seller
$900.00National Instruments NI 9215 C Series Voltage Input Module, BNC - USA Seller
$550.00 Add suggested items to your listings - Check it out on 3Dsellers.com listing template by 3Dsellers.com - Try for Free!National Instruments NI 9205 cDAQ Analog Input Module, 32 Channels
$499.99
National Instruments ELVIS II + Workstation With AC Adapter
$295.00
National Instruments NI 9211 cDAQ Temperature / Thermocouple Input Module !!!
$150.00