Help - How to edit APN settings in Z10
Please Login to Remove!
I posted the same thread in Z10 forum too.
Hi,
Looking for some help from the Z10 owners or Blackberry support.
Background:
. Purchased an new unlocked Z10, STL-100-3, running 10.1.0.4181
. Mobile Carrier is SpeakOut (711) which is on Rogers network
. Purchased a new micro SIM card from Carrier
. Boot up and see Rogers logo with APN set to default "ltemobile", no username, no password
Problem:
. Cannot browse Internet when on cellular network after purchased browsing add-on from SpeakOut
. SpeakOut support page has clear instructions on APN setup with username & password (apn=goam.com, username=wapuser1, pw=wap)
. Z10 APN setting is default to "ltemobile", no username, password, fields are grey out and cannot be edited so it did not connect
What I tried after reading hours of online forum discussions but still no connection:
. Using "escreen://", change APN to "goam.com", but I cannot find a place to edit/add username & pw
. Per Rogers web site, changed APN to "rogers-core-appl1.apn", "internet.com" without username & PW
. Yes, I hard rebooted Z10 after every change
Everything else on Z10 works fine, Wifi connection, voice call etc, however, cannot browse internet when Wifi is not availabile, I suspect is due to the incorrect APN settings
Can anyone tell me where to enter the APN username & password or have a solution to this issue?
I called SpeakOut and they said follow the APN settings, if it does not work then it is a device issue, I cannot find how to reach Blackberry support directly.
SpeakOut is a good discount carrier for a casual user like me, performance is not a major issue for me, I do not want to lock into more expensive contracts with Rogers, Bell or Telus
Thanks in advance
|